Poleradbetong.se

+46735008541

INNOVATIVE TECHNOLOGY

Innovative Technology for Concrete floors increases gloss and Doi (Distinct Image,Clarity in the reflection.)

Polerad Betong AB, is a local manufacturer outside Gothenburg of  ConcreteDensifier ns and Concrete Shields ns, based on Nano Silica. By far when you want to achieve the

  • Highest strenght, abrasion resistance, gloss and highest Doi reading when polishing concrete floors

In collaboration with our Nano Silica materials ConcreteDensifier ns and ConcreteShield ns, you achieve a completely different level of end result on the concrete floor than you would achieve with consolidation materials that are based on Sodium, Potassium or Lithium Silicate. SIMILAR PRODUCTS HAVE BEEN AVAILABLE ON THE AMERICAN MARKET SINCE THE EARLY 2000S.
Power Trowel Polish Concrete FloorsPolished Concrete Floors
ConcreteDensifier nsConcreteshield ns
NanO SILICA

ConcreteDensifier ns & ConcreteShield ns

ConcreteDensifier ns

ConcreteDensifier ns, Densifier, hardener and dust cover in a simple application and is ideal for substrates that require light sanding or mechanical polishing. The product penetrates deep into the concrete surface and reacts chemically with the concrete matrix and transforms the surface into an extremely dense surface. This makes the concrete floor more durable. Due to its neutral pH properties and unique chemistry, the product has the ability to penetrate concrete at a microscopic level and forms a long-lasting, attractive effect. Its fast-acting formula enables minimal downtime during applications. ENVIRONMENT & USER FRIENDLY • Closes capillaries and reduces dust • Increase wear resistance and surface hardness by up to 40% • Unique chemistry has a long-lasting effect • User-friendly application • Easy cleaning • Low odor. Can be applied during normal opening hours.

ConcreteShield ns

ConcreteShield ns is a water-based penetrating  sealer and densifier that provides a water-repellent (hydrophobic) waterproofing that is open to diffusion and improves the chemical resistance of the concrete floor. ConcreteShield penetrates deep into capillaries, microcracks and pores without forming a sealed film surface. A reaction then takes place between salts and minerals to form a very hard surface. This results in a crystalline structure that stops the transport of water but allows vapors to pass (diffusion). Because the protection is deep, it is insensitive to external influences such as abrasion and shocks. ConcreteShield leaves no current film on the surface and wears only if the substrate itself wears. Best results are obtained if it is high-speed polished 1500 rpm or more. 

 

Concrete Polishing with Power Trowel

together with ConcreteDensifier ns

& ConcreteShield ns

Our Unique 4 ”diamond tools with built-in flex and 10 mm thickness mean more square meters and stability. The diamond tools are available both as metal-bonded for more felling and plastic-bonded for higher gloss and polishing. Wet grinding eliminates airborne particles and the end result on the concrete surface is of a higher quality compared to dry sanding. We offer unique diamond tools developed together with leading manufacturers of diamond tools. In collaboration with our Nano Silica materials ConcreteDensifier ns and ConcreteShield ns, you achieve a completely different level of the end result on the concrete floor than you would achieve with consolidation materials that are based on Sodium, Potassium or Lithium Silicate.
Power Trowel Polish System Concrete PolishingPower Trowel Polish System Concrete Polishing

Power Trowel Concrete Polishing System

The tools are attached directly to the Smoothing Disc, which is equipped with a Velcro fastening device. Unbeatable low cost
Diamond Pads for Power Trowel Polishing System

 

  • Advantages

  • Low start-up costs -No expensive holders / suspension systems for diamond tools. -In terms of capacity, you perform several times larger floor space compared to conventional grinding machines at the same time.

  • Diamond Pads for Power Trowel Concrete Polishing System Our unique 4" diamond tools with built-in flex and 10 mm thickness mean more square meters and stability. The tools are formulated to create even stability and polishing of the surface. The diamond tools are available both as metal-bound for more removal and plastic-bound for higher shine and polishing. Also available in "3" to fit other holders. Wet sanding eliminates airborne particles and the end result on the concrete surface is of higher quality compared to dry sanding. Together with our Nano Silica materials ConcreteDensifier ns and ConcreteShield ns, you achieve a completely different level of final result on the concrete floor in terms of DOI (distinct image, clarity of reflection) than you would achieve with consolidation materials that are based on Sodium, Potassium or Lithium Silicate. The tools are applied directly to the Velcro-covered trowel disc. Benefits Low start up cost no expensive suspension systems. The capacity is several times higher compared to going with a conventional grinding machine. A set ie 16 pieces covers approx. 1000 - 2000 m² depending on the grit. Available in grit #50 - #400.  Both Copper Pads and Resin.
Concrete

Dry Pads


3" DIAMOND POLISHING PADS PREMIUM QUALITY FOR FLOOR GRINDERS. GIVES HIGH GLOSS AND IS DESIGNED FOR DRY POLISHING OF CONCRETE FLOORS WITH EXTREMELY GOOD SHARPNESS JUST LIKE A MIRROR. AFTER # 800 IT KEPT A HIGH FINISH ON GLOSS OVER 60 AND DOI AROUND 90, SEE PICTURES ABOVE. AT # 1500 VERY HIGH FINISH AT GLOSS AROUND 75 AND DOI AROUND 80. AVAILABLE IN # 50-3000. WE HAVE TESTED MANY DIFFERENT SUPPLIERS OVER SEVERAL YEARS TO FIND QUALITY EQUAL TO ALL ESTABLISHED COMPETITORS IN THE NORDIC. OUR TOOLS MAINTAIN EQUAL QUALITY AS TOOLS FROM COMPANIES SUCH AS HUSQVARNA OR SCANMASKIN. WE HAVE BUILT A TRUSTFUL RELATIONSHIP WITH OUR SUPPLIER AND WE ARE CONVINCED THAT YOU WILL EXPERIENCE OUR TOOLS MAINTAIN THE HIGHEST INTERNATIONAL QUALITY, BUT AT A SIGNIFICANTLY LOWER COST.
Polished Concrete Floor with high gloss and DOI DRY PADS for Concrete polishing

3 Steps Pro Kit Diamondpads

designed for Auto Scrubbers to renovate the concrete floor and deep clean in a simple and cost-effective way for property owners, cleaning companies etc. Pro KitDiamondpads 125 mm pads are designed to restore surfaces, scratches and orange peel. You will achieve a smooth surface.

They are easily attached to the usual cleaning pads under the machine. Use with low speed 150-450 rpm and water. Together with our ConcreteDensifier ns and ConcreteShield ns, they will refine your concrete floor in a simple and cost-effective way.
Hybrid Pads for easy renavating of concrete floorsAuto Scrubber Hybrid Pads for Renovating concrete floors
Surface Texture Meters

To achieve the best result for a concrete floor when grinding and polishing it, you should have measuring tools such as Surface Structure Meters and Gloss Meters to have control over the process. Many companies in the USA have been doing this for several years now to be able to repeat a good result on different concrete floors. We offer these tools and the knowledge to achieve the optimal end result even for operators who do not have much experience of Grinding and Polishing. The surface texture meter removes the guesswork when it comes to diagnosing the level of scratches in the floor. By measuring the RA level after each tool step, you ensure that you dial the correct RA number before moving on to the next tool. By measuring the surface structure, property owners and architects can know exactly what quality floor they are getting and you as a contractor are aware of the structure level you have achieved before you hand over the grinded and polished floor to your customer.
Surface Roughness Meter and Gloss MeterFloor made in BORÅS by us
Polished Concrete
We offer you Innovative technology of Diamond Tools System specially developed to be able to perform many square meters of surface in a rational and cost-effective way.
The floor is grinded and polished several times faster than with conventional technology, which means lower final costs for your customers and this is made wet to eliminate airborne particles.
See what the US Department of State is saying.
"In addition to market demand, wet polishing also protects site staff’s health effectively. In 2016, America OSHA (Occupational Safety and Health Administration) releases a policy named Safety and Health Regulations for Construction, stating that “···all employers of employees exposed to asbestos hazards shall comply with applicable protective provisions to protect their employees···The work shall be performed using wet methods.” OSHA requires employers to try best applying wet method to avoids site staff’s risks of getting Silicosis when doing floor construction works. "
We launch the latest technology from the USA, which is carried out with your riding trophies and our Diamond Tools. Together with the latest consolidation technology based on Nano Silica materials ConcreteDensifier ns and ConcreteShield ns, a higher end result is achieved on abrasion resistance and higher surface hardness than would be achieved with products based on older technology.
Your customers save money and time on downtime of premises. The floors are dust-free, easy to clean and extremely aesthetic.
CONTACT FORM

Briefly what you want information about.
Name Your e-mail Message SEND